轻触关闭
您现在的位置:首页 - 产品中心
产品中心
Product
产品详情 / Detail
轮毂(钢圈)专用粉末涂料,针对轮毂底层及面漆的特性及要求专门设计的环氧聚酯型粉末涂料系列产品。

special powder coating for hub (steel ring), specially designed epoxy polyester powder coating series for the characteristics and requirements of hub bottom and finish

 

涂层特性:

附着力强

流平性优

透气性高

耐盐雾性能好

Coating characteristic:

strong adhesion

excellent leveling

high air permeability,

salt spray resistance

 

用途:

适合汽车铝轮毂、钢圈

Application:

Suitable for automobile aluminum wheel hub, steel ring

 

喷涂方式:

高压静电喷涂60-80KV

Spraying method:

High voltage electrostatic sprayin 60-80KV

 

应用参数:

固化时间:

180摄氏度~200摄氏度X 10~15分钟

Application parameters:

Curing time

180℃~200℃X 10~15 mins

 

建议膜厚:

60-150 um

Recommended film thickness:

60-150 um

 

涂膜性能

COATING PROPERTIES

性能.jpg

以上试验均采用0.8mm纯铝板,涂膜厚度60 ~ 80um,涂膜的性能指标会随光泽不同稍有变化。

The above tests all use 0.8mm pure aluminum plate with a fim thickness of 60 ~ 80um. The performance index of the film will change slightly with the difference of luster.

本产品不含砷、硒、铅、六价铬、汞、锑、镉、等重金属,且符合RoHS要求。

This product does not contain arsenic, selenium, lead, hexavalent chromium, mercury, antimony, cadmium and other heavy metals, and meets RoHS requirements.

说明:我们会根据每位客户实际需求,提供完整的粉末涂料咨询及应用来定制方案,本报告中提及的各项测试指标,均为实验室检测所得出之数据仅供参考,不作为产品应用的性能承诺。

Note: We will supply complete consultation for our clients according to their actual demand and requirement, all the test indicators mentioned in this report are the data obtained from laboratory tests for reference only and do not represent the performance commitment of the product application.

 


返回上一级