It is suitable for anodic oxidation effect for product appearance, as well as environmental protection requirements such as Rohs and Reach.
Coating characteristics :
Good adhesion, excellent mechanical properties, tough coating film.
Coating film is Smooth and glossy
Good outdoor endurance
Excellent resistance to excessive baking
Suitable for a variety of outdoor products decoration and protection, such as: aluminum curtain wall, door and window frame, ceiling, etc
high voltage electrostatic sprayin 60-80KV
Recommended film thickness:
STANDARD TEST METHOD FOR ITEMIZER
以上试验均采用0.8mm除油除锈冷轧钢板，涂膜厚度40 ~ 80um,涂膜的性能指标会随光泽不同稍有变化。
In the above tests, 0.8mm cold rolled steel plates with oil and rust removal were used. The film thickness was 40 ~ 80um, and the performance index of .the film would change slightly with different gloss.
本产品不含砷、 硒、铅、六价铬、 汞、锑、镉、等重金属, 且符合RoHS要求。
This product does not contain arsenic, selenium, lead, hexavalent chromium, mercury, antimony, cadmium and other heavy metals, and meets RoHS requirements.
Storage conditions: dry at about 35°C, stored in the ventilated room, avoid direct sunlight. Under these conditions, the powder can be stored for 12 months, product can still be used after re -examined to be in good condition even if it is found to be expired.
Note: All the test indicators mentioned in this report are the data obtained from laboratory tests for reference only and do not represent the performance commitment of the product application.
The results vary with environmental factors and other conditions.