轻触关闭
您现在的位置:首页 - 产品中心
产品中心
Product
产品详情 / Detail

一般工业用粉末涂料,针对工业产品装饰件及外协件设计的系列产品。

General industrial powder coatings, decorative parts for industrial products and accessories designed series of products.

 

产品特性

PRODUCT FEATURES

 

涂层特性:

流平优良

机械性能高

耐盐雾性能好

Coating characteristics:

Excellent leveling

High mechanical properties

Good resistance to salt spray

 

用途:

适合机箱机柜、电梯、五金家具及外协零件等。

Application:

Suitable for cabinets, elevators, hardware furniture and spare parts, etc.


应用参数:

固化时间:

180°C ~ 200°Cx10-15分钟

Application parameters:

Curing time

180°C ~ 200°Cx10-15mins


建议膜厚:

60-150 um

Recommended film thickness:

60-150 um


喷涂方式:

高压静电喷涂60-80KV

Spraying method:

high voltage electrostatic sprayin 60-80KV

 

涂膜性能

COATING PROPERTIES

涂膜性能 COATING PROPERTIES.jpg


以上试验均采用0.8mm除油除锈冷轧钢板,涂膜厚度40~ 80um,涂膜的性能指标会随光泽不同稍有变化。

In the above tests, 0.8mm cold rolled steel plates with oil and rust removal were used.

The film thickness was 40 ~ 80um, and the performance index of the film would change slightly with different gloss.

本产品不含砷、硒、铅、六价铬、汞、锑、镉等重金属,且符合RoHS要求。

This product does not contain arsenic, selenium, lead, hexavalent chromium, mercury, antimony, cadmium and other heavy metals, and meets RoHS requirements.

说明:我们会根据每位客户实际需求,提供完整的粉末涂料咨询及应用定制的方案,本报告中提及的各项测试指标,均为实验室检测所得出之数据仅供参考,不作为产品应用的性能承诺。

Note: We will provide a complete powder coating consultation and application customized plan according to the actual needs of each customer. The test indicators mentioned in this report are the data obtained from laboratory

tests for reference only, and do not serve as the performance commitment of product application.

结果随环境因素及其它条件而会有变化

The results vary with environmental factors and other condition

返回上一级